|
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
Daystar
new! Digital Solar Meter Daystar's DS-05A solar meter brings “point and read” simplicity to the measurement of solar irradiance. Just turn the meter on, point the sensor at the sun, and obtain a reading in watts/square meter. Each meter is hand calibrated so you can rely on
the accuracy.
|
||||||||||||||||||||||||||
|
TOP |
||||||||||||||||||||||||||
|
Measure amps and volts in 12, 24 or 48 volt systems with these high-quality, low-cost LCD digital meters. The surface mount, 3" x 2" x 1" plastic enclosure can be easily attached to wood or metal surfaces with two screws. Terminal strip on the back of the meter accepts 14 to 22 AWG wire. Amp meters are available with a 100A/100mV shunt for measuring up to 100 amps with 0.1 amp resolution, a 500A/50mV shunt to measure up to 500 amps with 1 amp resolution or without a shunt for installations that already have a shunt. Current draw is only 20mA. Amp meter requires 4 conductor wire; volt meter requires 2 conductor wire. Use 22 gauge or larger for up to 50 feet. Use 18 AWG for up to 150 feet. 2 year warranty.
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
These meters read DC amps from a wire that is placed in the slot
frame on the rear of the meter cas The dual range meter has a 75 amp scale and a 600 amp scale. This amp meter will work with wire up to 2/0 gauge.
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
These high quality amp meters mount in a 72 mm square hole. The meter movement is very smooth and accurate. The shunt is built-in to the 30 amp meter so it can be in series with the load to be measured on the negative or positive wire. The 60 amp meter comes with a separate shunt. The mounting plate in the table below holds 1 meter and mounts in a 2-gang wire mold deep switch box.
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
We offer two types of kilowatt hour meter bases. The Milbank brand sheet metal base is 8" W x 11.5" H (shown with meter mounted). Both are for single phase 2- or 3-wire 100-amp service and both come with sealing ring. Raintight, NEMA 3R rated for outdoor use and UL Listed. The 5-terminal socket is rated at 200 amps, 480 VAC and is used with the 12S meter.The low-cost cast, round base has 1-1/2" threaded holes in the top and bottom. It is not UL Listed.
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
 Kill-A-Watt MeterThis kilowatt-hour meter is easy to set-up and use. It gives the user power usage information for individual appliances, displaying true power consumed (including power factor information), and keeps track of cumulative kilowatt-hours, cumulative time the meter has been plugged in, and amount of money the electricity consumed costs. The meter also maintains its reading when disconnected from the power source. A 15 amp circuit breaker protects against overloads. UL listed.
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
 Low Cost Digital MultimeterMeasure DC volts, AC volts, up to 10 amps AC or DC current, ohms, continuity and test diodes with this 9 volt powered (battery included). This inexpensive troubleshooting tool is made in China. Dimensions are 2.75" x 5" x 1".
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
All transactions made on this site are secure and Hacker Safe.
OUR PRICEs in this catalog subject to change without notice. |
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
This Site
Created by Artes del Lobo, Taos New Mexico & Maintained by Terry R. Wolff |
||||||||||||||||||||||||||
e. No electrical connection is needed. The 30
amp meter will work with wires up to 8 gauge. 
