Solar-Catalog.com 2008
Sine Wave Inverters
Catalog Contents
SolarTaos.com

AIR CONDITIONERS
APPLIANCES
AUTOTRANSFORMERS
BACKPACKS
BATTERIES, STORAGE
BATTERY
        ACCESSORIES
BATTERY CABLES
BATTERY CHARGERS
BATTERY CONTAINERS
BOOKS
CHARGE CONTROLLERS
CIRCUIT BREAKERS
COMPOSTERS
COMPOSTING TOILETS
DEHUMIDIFIERS
DISCONNECTS
ELECTRICAL SUPPLIES
FANS
FUSES & HOLDERS
FREEZERS
GARDEN COMPOSTERS
GENERATORS, BACKUP
GENERATOR STARTERS
GROUNDING PRODUCTS
HUMIDIFIERS
INVERTERS
   -GRID-TIE
   -GRID INTERACTIVE
   -OFF GRID, MODIFIED SINE
   -OFF GRID, SINEWAVE
   -PORTABLE
LIGHTING
LIGHTNING PROTECTION
LIGHTING CONTROLLERS
LOAD DIVERSION
METERS
MICRO HYDROPOWER
MONITORING SYSTEMS
PV MOUNTING STRUCTURES
RANGES
PORTABLE POWER
REFRIGERATION
SKYLIGHTS, TUBLAR
SOLAR PV MODULES
SOLAR WATER HEATING
STABER WASHERS
STOVES
TOILETS, COMPOSTING
TRANSFORMERS
USED ITEMS
VENTILATION
WASHING MACHINES
WATER PUMPS
WATER HEATERS, TANKLESS
WIND POWER
WIRE

The OutBack inverter is a modular "building block" sine-wave inverter/charger that can be used for both residential and commercial stand-alone and grid-connected applications with battery energy storage. Inverters are available in two version, a sealed, fan-cooled FX version and a higher powered ventillated VFX version. Each inverter/charger module is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch.

Additional inverter/chargers can be added at any time in either parallel (120VAC), series (120/240VAC), or even three-phase (120Y208 VAC) configurations, allowing the system to be tailored to the specific needs of the application, both at the time of installation and into the future. With the addition of an X-240 autotransformer, multiple inverter systems can be set up to provide 120/240 VAC split-phase output with the ability to provide full power on either 120 VAC leg of the system. Up to ten inverters can be connected together to provide up to 36 kW of continuous power capacity with the use of the HUB and the MATE controller.

The inverter’s powerful battery charger operates in five stages: BULK (constant current output), ABSORB (constant voltage output), FLOAT (reduced voltage output), SILENT (no charger output) and EQUALIZE (constant voltage regulation overcharging). Charge time in each stage is adjustable to provide control and to maximize the performance of the charger and battery system.

Each OutBack inverter has one programmable, auxiliary relay output connection (AUX). The AUX terminal provides 12 VDC output to run 12V cooling or ventilation fans or operate an external relay to perform other functions, such as remote generator starting (two-wire), to disconnect external charging sources (such as PV), or to turn on a diversion load for voltage regulation.

The built-in transfer switch is rated for 60 amps. When an external source of AC power (either a generator or the utility grid) is detected at the "AC In" terminal on the inverter, the switch operates to transfer the loads to the external power source, and then activates the battery charger to re-charge the battery bank.

Dimensions: 16.25"L x 8.25"W x 11.5H.

ETL listed to UL1741

Standard 2-year warranty with an available 5 year extended warranty.
TOP

Outback FX Sealed Inverters with Turbo Fan

The OutBack FX-series is designed to survive harsh environments anywhere in the world. Their unique sealed, gasketed die-cast aluminum chassis protects and keeps the power conversion components cool - without requiring outside air to be blown through the sensitive electronics. This reduces the major causes of inverter failure - corrosion, dust, insect and animal damage. They can be used in high ambient temperature applications up to 60°C with reduced output ratings.
 

TOP

The OutBack VFX series is a ventilated version of the original sealed FX series modular inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series.

The full screened vent openings are "bug-proof" and the die-cast aluminum chassis protects and keeps the power conversion components cool in very hot environments even when operated at high power for extended periods. The VFX can be used in high ambient applications up to 60^oC (with reduced output ratings)

Ventilated inverters are a better choice when generator powered battery charging is an important part of system battery charging. The fan cooling allows far higher continuous battery charging current which results in shorter generator run time.

ETL listed.

Standard 2-year warranty with an available 5 year extended warranty

Dimensions: 16.25"L x 8.25"W x 11.5"H.

OutBack Ventilated Fan Cooled Inverters
Outback Model	Continuous Watts	Battery Voltage	AC Out Volts/Hertz	No Load Draw	Charger Amps	Peak AC Surge	Weight (lbs.)	Code	MSRP	Price	Purchase
VFX2812	2800	12VDC	120V/60Hz	20W	125	56 A	54	30.4149	$2,345	$1,995
VFX3524	3500	24VDC	120V/60Hz	20W	85	70 A	54	30.4155	$2,345	$1,995
VFX3648	3600	48VDC	120v/60Hz	23W	45	70 A	54	30.4157	$2,345	$1,995
Export Models
VFX2612E	2600	12VDC	230V/50Hz	20W	120	56 A	54	30.4134	$2,345
VFX3024E	3000	24VDC	230V/50Hz	20W	85	70 A	54	30.4136	$2,345
VFX3048E	3000	48VDC	230V/50Hz	23W	42	70 A	54	30.4138	$2,345

TOP

Use these accessories to to integrate power electronics into an Outback Power System, to connect it to conduit or to stack multiple inverters.

A Hub is required to connect more than one inverter to the same load or to connect inverters, MATEs and MX charge controllers to allow programming and monitoring of the entire system by the MATE.

The remote temperature sensor is important for accurate battery charging, especially if the batteries get very warm or cold. If used with a HUB, one temp. sensor can be shared by all inverters
 

PRICING OR PURCHASE

TOP

The OutBack MATE is a complete system controller and display for both the OutBack inverter/charger and MX60 MPPT PV charge controller. It provides a display of the operation as well as allows control and adjustment of the setpoints.

 The OutBack MATE also coordinates the operation of the entire system to maximize performance and to prevent multiple products from conflicting.

A single OutBack MATE is able to connect to multiple inverter/chargers, MX60 MPPT PV charge controllers and any other OutBack power conversion and control products offered in the future. A maximum of ten OutBack products will be able to be connected to a single MATE via CAT 5 ethernet type cabling with 8 wire RJ45 modular connectors and the OutBack HUB communication manager.

The OutBack MATE also includes an opto-isolated RS232 port with a DB9 jack for connection to the serial port of a PC computer.

The Mate2 has a flush-mount black face for panel or in-wall mounting.

2-year warranty.

PRICING OR PURCHASE

The MidNite Solar E-Panel is a quick and easy way to install an Outback inverter. It comes standard with the basic over-current protection and disconnects required to install your renewable energy system. It can also expand to grow as your needs arise. The picture at right shows an Outback inverter mounted on an E-Panel.

The inverter mounts on a unique hinged door to keep the foot print of the system as small as possible. Mounting brackets are included to aid in one person installations.

Main breaker, inverters cables, a 500 amp / 50mv shunt for battery monitoring systems, 175 amp AC power distribution block, 50 amp AC input disconnect for generator or utility, 50 amp AC bypass switch are included and pre-wired. It comes with a mounting bracket for an OutBack MX60.

Cut outs for mounting up to six additional 13mm wide din rail mount breakers are provided as well as a cut out for a GFCI style AC outlet.

ETL listed to UL and CSA standards.
 

E-Panels for OutBack Inverters
Midnight Model	Description	Item Code	Price	Purchase
MNE125ST	Gray steel chassis with 125 amp inverter breaker	30.5125	$435
MNE125ST-L	Gray steel chassis with 125 amp inverter breaker, left hinge	30.5126	$435
MNE175ST	Gray steel chassis with 175 amp inverter breaker	30.5129	$475
MNE175ST-L	Gray steel chassis with 175 amp inverter breaker, left hinge	30.5130	$475
MNE205ST	Gray steel chassis with 250 amp inverter breaker	30.5133	$475
MNE205ST-L	Gray steel chassis with 250 amp inverter breaker, left hinge	30.5134	$475
MNE175STS	Gray steel chassis with 175 amp inverter breaker 18" wide	30.5131	$535
MNE250STS	Gray steel chassis with 250 amp inverter breaker 18" wide	30.5135	$535
MNE125AL	White Alum chassis with 125 amp inverter breaker	30.5137	$475
MNE125AL-L	White Alum chassis with 125 amp inverter breaker, left hinge	30.5138	$475
MNE175AL	White Alum chassis with 175 amp inverter breaker	30.5141	$515
MNE175AL-L	White Alum chassis with 175 amp inverter breaker, left hinge	30.5142	$515
MNE205AL	White Alum chassis with 250 amp inverter breaker	30.5145	$515
MNE205AL-L	White Alum chassis with 250 amp inverter breaker, left hinge	30.5146	$515
MNEleftdoorsST	Gray Steel left hand hinge door with alum right hand CCB	30.5237	$60
MNEleftdoorsAL	White Alum left hand hinge door with alum right hand CCB	30.5241	$65
MNEPV63	63 amp 125VDC din rail mount breaker (13mm wide)	30.5245	$15
MNDC-GFP	63 amp DC ground fault protector	30.5249	$65
MN-APOLLO	Kit to mount Apollo t80 on E-Panels	30.5280	$70
E-Panels for Magnum Inverters
MNE175STM	Gray steel chassis with 175-amp inverter breaker	30.5161	$535
MNE250STM	Gray steel chassis with 250-amp inverter breaker	30.5163	$535
MNE175STM-40	White steel chassis with 175-amp inverter breaker – 120/240	30.5167	$755
MNEleftdoorsSTM	Gray Steel left hand hinge door with right hand CCB	30.5165	$60
E-Panel Lite for Xantrex SW and DR Inverters
MNE125ST	Gray steel chassis with 125-amp inverter breaker	30.5105	$400
MNE175ST	Gray steel chassis with 175-amp inverter breaker	30.5109	$435
MNE250ST	Gray steel chassis with 250-amp inverter breaker	30.5113	$435

TOP

The Sunny Island SI4248U is new to the USA, but has been available in a 230 volt 50 Hz version for use in Europe and developing countries for many years. It is a bi-directional battery inverter for stand-alone, off-grid applications or for adding battery backup to grid intertie systems that use SMA Sunny Boy inverters.

As a stand alone inverter, the Sunny Island converts DC electricity from a 48 volt battery to 120 VAC power. If a generator is used for backup power, it becomes a battery charger when the generator is running and can support the generator output when the load is larger than the generator can power alone. Several Sunny Island inverters can be combined with PV modules, wind, hydroelectric and fossil fuel generators to from a mini-grid remote power system. The SI4248U manages battery charging and can start and stop the generator when necessary.

When used to provide battery backup to a Sunny Boy grid-connected system, the Sunny Island AC input is connected to a circuit breaker in the main load center and its output is connected to an AC subpanel which is fed by the output of the Sunny Boy inverter(s) and which powers critical loads that will receive backup power in the event of a power failure. The Sunny Island is also connected to a 48 volt battery bank.

When the grid is operating, the Sunny Island passes the power generated by the PV system to the main load center and on to the grid. It also manages the batteries and charges them when necessary. When grid power fails, the Sunny Island supplies AC power to the subpanel, keeping the critical loads running. The AC power supplied to this subpanel keeps the Sunny Boy inverters in the PV systems operating. Power from the PV system can supply the critical load subpanel. If the PV system is generating more power than the loads require, the excess power is used by the Sunny Island to charge the batteries. If the demand from the loads is greater than the PV system can supply, the Sunny Island supplies the extra power necessary to keep the loads running. During the grid failure, the power system becomes a power "island" and continues to use all of the PV power. ETL listed.

TOP

Xantrex SW Plus

The New SW Plus Inverter/Charger, like the SW, is designed to provide homes with a completely independent power supply. They can be programmed to operate as a stand-alone inverter, a generator hybrid, for utility management, or for back-up power. Surge power has been improved. The SW Plus cannot be used as a utility-tied sell-back inverter. All program settings are stored in flash memory so they are maintained even if the inverter is disconnected from the battery. Two SW Plus inverters can be stacked to provide up to 11 kW of 120/240 VAC power. The inverter communications adapter interfaces with a personal computer.

The SW Plus can be programmed to start and stop generators with the addition of a GSM. The ALM can be added to control loads for power diversion regulations or to control a battery vent fan. ETL listed. 2-year warranty. Dimensions are 15" x 22.5" x 9"

The SW Plus Long DC Conduit Box (DCCB-L) connects to the DC side of one or two inverters and provides a centralized location for the DC circuit breakers and PV Ground Fault Protection (GFP) breakers. It is also designed to incorporate up to two charge controllers, and cabling for a battery meter (there is a space on the front cover to mount a Xantrex TM500A meter). The DCCB-L includes a 175 or 250 amp circuit breaker, a DC negative bus bar and 500A/50 mV shunt, battery cables (1 set) and a ground wire connected to the ground bar. For expandability, the Long DC Conduit Box is designed so that a second DCCBL can be added on for additional breaker spaces, wiring, room and controller mounting spaces. Knockouts are provided for 1/2", 3/4" and 2" sizes. Certified to meet UL1741-2001.

The SW Plus Long AC Conduit Box (ACCB-L) connects to the AC side of one or two SW Plus inverters. It is designed to protect the wiring connections to the inverter and provides room for up to nine additional AC disconnect breakers (Square D, Type QOU, DIN rail mounted) to protect user-specified loads. The ACCB-L includes an AC bypass switch (for a single AC input source) and input/output wiring attached to the AC Input/Output Terminals, a Neutral bar with neutral wire installed, and an isolated HOT bar.

1 or 2 inverters and AC and DC Conduit Boxes can be bolted to the 2-piece back plate to build a power panel. Other options at right can be added to the system.