| ||||||||||||||||||||||||||
Commercial Inverters are placed
into production once your order is processed.
You can place your order on line but if your purchase is over $10,000 you
will have to follow up by paying with a wire transfer. Once cleared, your
credit card will be refunded.
Lead time on Commercial Inverters is approximately six weeks.
Actual lead time depends on the manufactures case load.
All Commercial Inverters ship directly from the manufacture.
Xantrex GT Grid Tie
InvertersThe Xantrex GT-series inverters have an
integrated, lockable 600 volt PV/Utility disconnect switch which may
eliminate the need for external disconnects in some locations. Its attached
wiring box provides protection for all AC and DC connections, eliminating
exposed wiring during inverter installation and removal. The wiring box
includes eight 3/4 inch knockouts and easy access DC and AC terminal blocks
that accept wire sizes from #14 to #6 AWG.
The GT is packaged in a NEMA 3R enclosure for outdoor installation. It incorporates a slotted, hook-style back plate. For large systems, multiple inverters can be mounted side by side centered on standard 16" stud spacing to reduce visible conduit and make installations look more attractive.
GT inverters come standard with a backlit 16-character two line Liquid Crystal Display. The display provides inverter power, daily and lifetime energy production, PV array voltage and current, utility voltage and frequency, time online "selling" today, fault messages, and two installer customizable screens. Tapping a finger close to the LCD activates the backlight display. With each tap, the display cycles through all the communication screens.
The LCD is always on standby, ready to provide information even at night. When inverters are daisy chained using standard CAT5 Ethernet cable, each inverter display will report the output of the entire system. The GT offers an isolated RS232 port and two Xanbus RJ45 communication ports. No additional communication ports or cards are needed to connect a PC.
Xantrex offers the GT Solar Inverter Viewer software, which can be downloaded from their Web site. The GT 3.0 provides 3000 watts of power up to 30°C (86°F) and 2,500 watts of power up to 45°C (113°F). For added protection from heat in desert extremes or south facing inverter installations, an optional fan kit can be ordered.
UL listed.
5- year warranty standard, a 5 year extension is available
| Description | PART NUMBER | OUR PRICE | Purchase |
| Xantrex GT2.5 2500 Watt 240V Grid Intertie Inverter | 030-01830 | $2,275 |
 |
| Xantrex GT3.0 3000 Watt 240V Grid Intertie Inverter | 030-01831 | $2,500 |
|
| Xantrex GT3.3 3300 Watt 240V Grid Intertie Inverter | 030-01832 | $2,775 |
|
| Xantrex GT3.3 3300 Watt 208V Grid Intertie Inverter | 030-01834 | $2,775 |
|
| Xantrex GT3 Fan Kit | 030-01836 | $150 |
|
| Xantrex ModeI | Maximum DC array amps | Maximum DC array volts | MPPT input voltage range | CEC Efficiency 208/240 | PART NUMBER | OUR PRICE | Purchase |
| GT2.8 2800-watt 208/240V | 14.9/15.4 | 600 | 195 - 600 | 94.5%/95% | 030-01801 | $2,200 |
|
| GT3.3 3300-watt 208/240V | 17.0/18.0 | 600 | 195 - 600 | 94.5%/95% | 030-01803 | $2,700 |
|
| GT4.0 4000-watt 208/240V | 20.0/22.0 | 600 | 240 - 600 | 94.5%/95% | 030-01804 | $3,000 |
|
| GT5.0 5000-watt 208/240V | 21.0/22.0 | 600 | 240 - 600 | 94.5%/95% | 030-01805 | $3,800 |
|
| GT solar inverter monitor | Monitor up to 5 inverters. Use Cat-5 cable to connect | 030-01835 | $300 |
|
|||
| Communications gateway | Monitor up to 7 inverters with a PC. Use Cat-5 cable to connect | 030-01813 | $625 |
|
|||
GT 3-Phase
Commercial Inverters The GT Commercial Series grid-tie inverter makes industrial-commercial power production affordable and attractive. These inverters have the highest efficiency of any large
commercial inverters on
the market. Xantrex GT inverters are available in sizes from 30 kW to 250
kW.
The compact, 220-pound, 30kW inverter is in a wall-mounted aluminum enclosure and requires a symmetrical array input (split array +/-180-500VDC).
100kW and 250kW inverters have pad-mounted epoxy-coated steel enclosures with integrated transformers and disconnects. These inverters can be configured as positive ground for use with SunPower modules. They require zero clearance on back and sides and can fit through standard doors.
UL Listed.
5-year warranty; 5-year extension available.
|
Xantrex model |
Continuous output (kW) | AC output voltage | Max DC amps | Max DC array voltage | MPPT range | CEC efficiency |
Dimensions
H" x W" x D" |
PART NUMBER | OUR PRICE | Purchase |
| GT30-208 | 28.8 | 208 | 100 | 600 | 180-500 | 96% | 44 x 22 x 13 | 030-02003 | $27,800 |
|
| GT100-480 | 100 | 480 | 347 | 600 | 300-600 | 96% | 69 x 67 x 42 | 030-02015 | $74,200 |
|
| GT100-208 | 100 | 208 | 347 | 600 | 300-600 | 96% | 69 x 67 x 42 | 030-02017 | $74,200 |
|
| GT250-480 | 250 | 480 | 867 | 600 3 | 00-600 | 96% | 84 x 91 x 42 | 030-02026 | $121,995 |
|
 Sunny Tower 36kW and 42 kW Systems  The Sunny Tower combines the advantages of central inverters with the performance and installation advantages of string inverters by offering assembled 36-kW or 42-kW systems. Each Sunny Tower consists of six 7-kW or 6-kW inverters mounted on a stainless steel structure. Two Sunny Towers can be combined as an 84 kW system. The Sunny Web Box may be purchased separately or assembled with the Sunny Tower making the system internet-ready. This type of system offers the advantage of multiple array MPP tracking, optimum operation under partial load, 96% CEC efficiency and quick delivery. Sunny Towers can be assembled on-site, eliminating the need for specialized heavy equipment. The system is NEMA 3R outdoor rated and can be used only in three phase systems at 208 VAC or 277 VAC and its total weight is 1115 lbs. (Tower is 330 lbs, plus six inverters) Tower can only be used with 6 Inverters. 10 year warranty
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sunny Central
 250U/500U Inverters With the growth of the commercial solar market, SMA has expanded its central inverter line for 2008. The new Sunny Central 250U and 500U have integrated isolation transformers and deliver the highest efficiencies available for large PV power plant inverters. The user interface has been completely updated and now features a large LCD that provides a graphical view of the daily plant production as well as the status of the PV array, inverter, and utility grid. The new 250U and 500U now offer optional PV string monitoring that makes the process of troubleshooting the PV array more efficient. The Sunny Centrals offer a wide variety of remote monitoring options. Users can now choose from RS485, Ethernet, or wireless communications via Bluetooth or GSM with the optional Web-Box. Daily performance data can be automatically uploaded to the free Sunny Portal website. The accuracy of performance data can be increased through the use of the optional Sunny SensorBox which provides monitoring of local irradiance, temperatures, and wind speed. The Sunny Centrals from SMA represent years of innovative design experience by the world's largest manufacturer of PV inverters. Designed for easy installation, operation, and performance monitoring, the new Sunny Centrals are the ideal choice for your large scale PV project.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Exeltech MX series inverters are a true sinewave, very versatile, custom
inverter designed for use where reliability is extremely important. MX
systems can be configured with power levels from 1000 Watts to 20KW at
120Vac output, 40KW at 240Vac bi-phase, or 60KW at 208Vac 3 phase. Power
levels are expandable, and inverter modules can be upgraded or replaced, and
if designed as a redundant system, replacement can occur while the system is
on line without interruption in power to your loads. The output voltage is
precisely regulated, such that no measurable voltage change occurs on the
output when the input voltage changes over its wide voltage range. Less than
0.5 volt change in output voltage will occur when the output load varies
from 0 to 100% of rated power. With distortion of 2% maximum, this offers
the cleanest sine wave power available. The system is extremely compact and
lightweight. Modules, cards and cages are combined to create the inverter
needed. MX inverters are available with 12, 24, 36, 48, 96, 108 and 120 VDC
input voltage.
A Master Module combines the control signals of a Control Card with a Power Module. This is a space saving solution when redundancy is not necessary. The Master Module provides control signals to up to 19 power modules.
The Power Module is a 1000 watt slave power inverter. It requires drive signals from a Master Module or Control Card. This module is the backbone of the inverter system and will be the majority of the modules in most systems.
The Control Card provides all the control functions for the Power Modules. Adding a second Control Card provides redundant operation as only one Control Card is required to operate the system.
The Alarm Card is necessary in a redundant system. It allows the inverter to detect a control card failure and switch to the backup Control Card. The Alarm Card provides LED indicators for DC On, inverter on, load presence, inverter fail, breaker open, high temperature, and low voltage and "form-C" contact closures for minor failure, major failure, inverter failure, bypass, DC failure, and AC failure.
The Transfer Switch allows the inverter to automatically switch between inverter power and a secondary source of AC power. The transfer switch has a maximum capacity of 50Amps and a typical transfer time of 4ms.
Determine the approximate OUR PRICE by adding the cost of the components needed from the chart below. For 120/240V operation, use twice as many Master Modules or Control Cards and Cages. For 3-Phase use 3 times as many Master Modules or Control Cards and Cages.
Exeltech MX inverters will be factory assembled to your specifications. To order an MX inverter please call your vendor or i�requirement, transfer switch requirement and cage size and they will give you a final quote.
|
Requirements |
MX Component |
Description |
OUR PRICE |
Purchase |
| Choose One | Master Module | Use 1 per system if you are not building a redundant system |
$716 |
|
| Control Card | Use 2 in each system for redundant operation |
$238 |
Call | |
| Choose as many as necessary | Power Module | Use one for each 1000 watts output if using Control Cards or 1 less than total output required if using a Master Module. Add 1 additional for N+1 redundancy. |
$701 |
Call |
| Choose One | Rack A 19" | 1 required - holds Transfer Switch/Alarm Module and 2 Control Cards with up to 4 Power Modules or 1 Master Module with up to 4 Power Modules |
$701 |
Call |
| Rack A 23" | 1 required - holds Transfer Switch/Alarm Module and 2 Control Cards with up to 5 Power Modules or 1 Master Module with up to 5 Power Modules |
$701 |
Call | |
| Choose One | Rack B 19" | Holds up to 5 Power Module - for expansion only. Width must match Rack A Choice |
$701 |
Call |
| Rack B 23" | Holds up to 6 Power Module - for expansion only. Width must match Rack A Choice |
$701 |
Call | |
| Optional | Transfer Switch | Optional on Redundant and Non-redundant systems |
$533 |
Call |
| Alarm Card | 1 Required for redundant systems |
$238 |
Call |
Solectria
3-Phase Commercial Inverters
Solectria Renewables PVI inverters use rugged DSP-controlled IGBT circuitry to achieve high efficiency, reliability and low installed cost. The NEMA 3R enclosure with forced ventilation allows these inverters to be mounted in full sun, on roof tops or indoors.
Inverter electronics are in a NEMA 4X enclosure within the housing. Their fully integrated design includes transformer, filters and AC and DC disconnects.
Disconnects face to the side. If you are using multiple inverters
and need to have the 
disconnects
facing forward to minimize distance required between inverters, contact us
for pricing.
All Solectria inverters have an RS232 and RS485 communications ports; Fat Spaniel inverter direct monitoring ports are optional.
Inverters are listed to UL1741 and IEEE Std 1547 and are certified to IEEE 6241 NY SIR surge test requirements.
Solectria inverters come with a 5-year warranty. Call for pricing on
10-year warranty. They will be shipped from the Solectria factory in
Massachusetts.
| Inverter model |
AC power |
AC output voltage |
Max DC amps |
Max. DC array volts |
MPPT
Range volts DC |
CEC efficiency |
Weight (lbs) |
Dimension H"xW"xD" |
PART NUMBER | OUR PRICE | Purchase |
| PVI 13KW-208VAC | 13.2 kW | 208 | 60 | 475 | 225-380 | 94.00% | 376 | 34.5x 26x13.6 | 030-03863 | $14,623.00 |
|
| PVI 13KW-480VAC | 13.2 kW | 480 | 60 | 475 | 225-380 | 94.00% | 376 | 34.5x 26x13.6 | 030-03867 | $14,989.00 |
|
| PVI 15KW-208VAC | 15 kW | 208 | 68 | 475 | 225-380 | 94.50% | 398 | 34.5x 26x13.6 | 030-03871 | $16,443.00 |
|
| PVI 15KW-480VAC | 15 kW | 480 | 68 | 475 | 225-380 | 94.00% | 398 | 34.5x 26x13.6 | 030-03875 | $16,808.00 |
|
| PVI 60KW-208VAC | 60 kW | 208 | 190 | 600 | 330-500 | 94.00% | 1526 | 76x56x29.3 | 030-03885 | $50,243.00 |
|
| PVI 60KW-480VAC | 60 kW | 480 | 190 | 600 | 330-500 | 95.50% | 1526 | 76x54x25.3 | 030-03889 | $49,295.00 |
|
| PVI 82KW-208VAC | 82 kW | 208 | 248 | 600 | 330-500 | 94.50% | 1591 | 76x56x29.3 | 030-03893 | $54,851.00 |
|
| PVI 82KW-480VAC | 82 kW | 480 | 248 | 600 | 330-500 | 95.50% | 1591 | 76x54x25.3 | 030-03897 | $53,626.00 |
|
| PVI 95KW-208VAC | 95 kW | 208 | 287 | 600 | 330-500 | 94.50% | 1610 | 76x56x29.3 | 030-03901 | $60,887.00 |
|
| PVI 95KW-480VAC | 95 kW | 480 | 287 | 600 | 330-500 | 95.50% | 1610 | 76x54x25.3 | 030-03905 | $59,479.00 |
|
| SGI 266KW-480V | 266kW | 480 | 600 | 95.50% | 030-03930 | $127,024.00 |
|
||||
| SGI 500KW-480V | 500kW | 480 | 600 | 95.50% | 030-03950 | $242,342.00 |
|
||||
| Fused combiner for 13.2KW and 15KW inverters. Specify 6 or 7 fuses and fuse size (10A or 15A) – integrated into inverter – add | 030-03859 | $495 |
|
||||||||
| Fused combiner for 60KW, 82KW and 95KW inverters. Specify 6 or 7 fuses and fuse size (40A or 250A) – integrated into inverter – add | 030-03860 | $495 |
|
||||||||
Powergate 3-Phase Commercial Inverters
PowerGate inverters offer high reliability, efficiency and ease-of-use for large-scale grid-connected photovoltaic systems. A single-enclosure solution, the utility-grade PowerGate incorporates a high-efficiency transformer and both AC and DC switchgear that disconnect the inverter at night, minimizing tare loss. A highly efficient MPPT tracking algorithm and intelligent wake-up routine further maximize net energy harvest.
The PowerGate is certified to UL-1741 and is available with a
variety of local and remote data monitoring options. A 4-line alphanumeric
LCD display provides local monitoring. A single enclosure with
integrated high-efficiency transformer and internal AC and DC switchgear
simplifies installation.
OUR PRICE below includes integrated sub-array combiner. See table below
for the number of fused 100 sub-array string inputs. PV View
web-enabled data monitoring,
PV Zone sub-array performance monitoring and RS485 Modbus are optional. Call for pricing.
Wide input voltage range.
SatCon offers a standard 5-year warranty on all inverters. A
10-year warranty costs 15% of the OUR PRICE of inverter plus
accessories. A 15-year warranty costs 35% of the OUR PRICE of inverter plus
accessories.
| SatCon options | PART NUMBER | OUR PRICE | Purchase |
| SatCon PV view direct monitoring CC00302 | 030-03321 | $3,695 |
|
| SatCon PV view direct each additional inverter SF00030 | 030-03323 | $1,995 |
|
| SatCon PV weather & environmental monitoring | 030-03331 | $3,945 |
|
| SatCon wind speed and direction add to 030-03331 | 030-03333 | $1,945 |
|
| SatCon rev grade PV View daisy chain | 030-03327 | $4,825 |
|
| SatCon PV Zone monitoring – cost varies based on inverter size | Call | ||
| Model |
Continuous output (kW) |
AC output voltage |
Max DC amps |
Max DC array volts |
MPPT range |
CEC efficiency |
Weight (lbs) |
PART NUMBER | OUR PRICE | Purchase |
| AE30-60-PV-D | 30 | 208 | 96 | 600 | 295-600 |
92.5% | 1300 |
030-03210 | $33,780 |
|
| AE30-60-PV-A | 480 | 93.0% | 030-03209 | $32,995 |
|
|||||
| AE50-60-PV-D | 50 | 208 | 160 | 600 | 295-600 | 94.5% | 1778 | 030-03218 | $38,780 |
|
| AE50-60-PV-A | 480 | 93.0% | 030-03216 | $37,795 |
|
|||||
| AE75-60-PV-D | 75 | 208 | 240 | 600 | 295-600 | 95.0% | 2600 | 030-03222 | $58,420 |
|
| AE75-60-PV-A | 480 | 95.5% | 030-03220 | $57,240 |
|
|||||
| AE100-60-PV-D | 100 | 208 | 319 | 600 | 295-600 | 94.5% | 3250 | 030-03226 | $71,995 |
|
| AE100-60-PV-A | 480 | 94.5% | 030-03224 | $71,280 |
|
|||||
| AE135-60-PV-D | 135 | 208 | 431 | 600 | 295-600 | 95.0% | 3500 | 030-03233 | $87,980 |
|
| AE135-60-PV-A | 480 | 95.5% | 030-03231 | $86,395 |
|
|||||
| AE225-60-PV-A | 225 | 480 | 718 | 600 | 295-600 | 94.5% | 4800 | 030-03235 | $113,395 |
|
| AE500-60-PV-A | 500 | 480 | 1595 | 95.0% | 5400 | 030-03237 | $216,680 |
|
Commercial Grid-Tie Inverters
PV Powered commercial inverters combine the benefits of high reliability, low lifetime cost and leading efficiency into one easy-to-install system. The design features the latest advances in power technology including an intelligent power module that uses fifth generation, self-protecting IGBT silicon, the most efficient and reliable silicon technology available.
System reliability is ensured by superior quality components including an integrated 98%-efficient Energy Star-rated transformer with field-configurable AC voltage output; acid-free, long-life, film type capacitors; and a medical-grade DC power supply that provides clean, reliable power
to system control components.PV Powered commercial inverters offer a voltage window of 295-600VDC. This is the widest operating range with the lowest standard MPPT voltage of any three-phase inverter in the industry. This provides exceptional stringing capability with all PV modules currently available including new thin film modules. Serviceability is enhanced by a modular design that divides the inverter into easy-to-maintain subsystems. PV Powered backs all their inverters with a 10-year nationwide warranty and top-notch service and support. ETL Listed to UL 1741.
PVM1010 Monitor
The PV Powered performance monitoring system includes the PVM1010 data monitoring module and user access to inverter performance information on a password-protected website at mypvpower.com.
The PVM1010 along with the secure Internet-based server operated
by PV Powered is equivalent to a standalone data logging meter and
communication interface without the cost and inconvenience of installation
and maintenance of a separate metering system.
• Access your information from anywhere you can
connect to the Internet
• Reports power output and energy production trends
• View local weather conditions and forecasts
• Verify that your system is working at its full
potential
• Collect and export data for service and maintenance
planning
|
PV Powered model |
Continuous output (kW) |
AC output voltage |
Max DC amps |
Max DC array voltage |
MPPT range |
CEC efficiency |
Dimensions H" x W" x D" |
Weight (lbs) |
PART NUMBER | OUR PRICE | Purchase |
| PVP30-208 | 30 | 208 | 109 | 600 | 295-500 | 93.0% | 47.7 x 30.4 x 25.9 | 760 | 030-03826 | $26,995 |
|
| PVP30-480 | 30 | 480 | 109 | 600 | 295-500 | 93.5% | 47.7 x 30.4 x 25.9 | 760 | 030-03828 | $26,995 |
|
| PVP75-208 | 75 | 208 | 267 | 600 | 295-500 | 96% | 93 x 63 x 35 | 2750 | 030-03830 | $54,275 |
|
| PVP75-480 | 75 | 480 | 267 | 600 | 295-500 | 96% | 93 x 63 x 35 | 2750 | 030-03832 | $54,275 |
|
| PVP100-208 | 100 | 208 | 356 | 600 | 295-500 | 96% | 93 x 63 x 35 | 3000 | 030-03833 | $63,325 |
|
| PVP100-480 | 100 | 480 | 356 | 600 | 295-500 | 96% | 93 x 63 x 35 | 3000 | 030-03835 | $63,325 |
|
| PVM1010 | Performance monitor card 2 | 030-03803 | $385 |
|
|||||||
|
WE ACCEPT... |
||||
|
|
 |
|
|
|
All transactions made on
this site are secure and Hacker Safe.
Your Payments are processed for Taos Green Solar at
SolarTaos.com
through PayPal, a trusted company owned and operated by eBay.com
OUR PRICEs in this catalog subject to change without notice.
|
If you are
interested in
quality supplements,
please click on the
above logo. |
Visit |
 Woodcare Product |
