Paloma Tankless Water Heater Accessories available at Solar-Catalog.com

TIV - Tankless Installation Valves

Makes installing your tankless water heater easy! Designed to save time and ensure that installation is completed in a professional manner.

Availability: Usually ships within two business days.

$95.00

TPRV100 Temperature and Pressure Relief Valve
fir Paloma PH12 and Paloma PH6
Required on tankless water heaters under 100,000 Btu

TPRV100

$8.50

DUOnex™ Cable

Run your Paloma Tankless SOLO, or combine two units together for a Tankless DUO with 2X the performance.

DUOnex

$40.00

High Altitude Chip
for PH20RDVS

High Altitude Chip for PH20RDVS.

31-80885/31-80882

$50.00

High Altitude Chip
for PH28RDVS

High Altitude (3,281' - 6,560' or 6,560' - 9,840') Chip for The Paloma PH28RDVS.

31-51182/31-51183/31-51184/31-51190

$50.00

Bath Remote Control 1

Bath Remote Control is intended to be installed in bathroom area. Temperature adjusting range 100F-120F.

USC1-117

$150.00

Bath Remote Control 2

Bath Remote Control is intended to be installed in bathroom area. Temperature adjusting range 100F-120F.

USC2-117

$150.00

1/2" Flexible Water Connectors (Set of 2)
for PH-6
Two 12" Stainless Steel Flexible Connectors

Two 1/2" Inside Diameter, 12" Long Stainless Steel Flexible Connectors.

Two_S-02x12

$12.00

Falcon 3/4" Flexible Water Connectors (Set of 2)

for PH20RDVS & PH25RDVS
(Set of 2) - 3/4" Inside Diameter, Stainless Steel, 18" Long Flexible Water Connectors.

falcon34-18

$15.00

Tru-flex 3/4" Flexible Gas Connector

for PH20RDVS & PH25RDVS
3/4" Inside Diameter, 24" Long, Flexible Stainless Steel Gas Connector.

truflex34-24

$40.00

Un-Clog-It Descaling Kit

Simple, inexpensive do-it-yourself method of dissolving harmful mineral buildup from water lines.

Unclogit

$169.00

ClearWave HD-1 Water Conditioner

Revolutionary product that works without salts, chemicals or plumbing.

Clearwave HD1

$249.00

Paloma PH25 Series Pipe Cover for Direct Vent Models

The pipe cover gives a nice finished to the look of your water heater, and can be installed on both indoor and outdoor models.

PC-25 DV

$89.00

Paloma PH28 Series Pipe Cover

The Pipe Cover gives a nice finish to the look of your water heater. This pipe cover can be installed on indoor and outdoor models.

PC-28

$109.00

Paloma PH6 Water Valve Rebuild Kit
This kit includes parts and instructions.
Availability: Usually ships the next business day.

PH6_WVRK

$45.00

Heatfab 3"/5" Ventilation Accessories
for PH20RDVS & PH25RDVS Direct Vent Models

Vent pipes, elbows, rain cap, drip tee, flashing and other accessories for PH20 & PH25 direct vent models.

Adapter for Paloma PH-20RDVS & PH25RDVS

Special adapter for Paloma PH-20RDVS & PH25RDVS. Connects the flue collar to the HeatFab vent system.

SC03AD05

$54.00

94 Degree Elbow for PH20RDVS & PH25RDVS

3"/5" Elbow - 94 Degrees. This elbow is designed for downsloping horizontal terminations.

SC03E94

$73.00

90 Degree Elbow for PH20RDVS & PH25RDVS

3"/5" Elbow - 90 Degree

SC03E90

$79.00

45 Degree Elbow for PH20RDVS & PH25RDVS

3"/5" Elbow - 45 Degree

SC03E45

$66.00

HeatFab Vent Pipe 6" Length

for PH20RDVS & PH25RDVS
3"/5" x 6" length

SC03L6

$45.00

HeatFab Vent Pipe 12" Length

for PH20RDVS & PH25RDVS

3"/5" x 12" length

SC03L12

$53.00

HeatFab Vent Pipe 24" Length

for PH20RDVS & PH25RDVS

3"/5" x 24" length

SC03L24

$68.00

HeatFab Vent Pipe 36" Length

for PH20RDVS & PH25RDVS

3"/5" x 35" length

SC03L36

$85.00

HeatFab Vent Pipe 12.5" - 19.5" Adjustable Length

for PH20RDVS & PH25RDVS

3"/5" - 2 piece 12.5" - 19.5" Adjustable Length

SC03AJ

$96.00

HeatFab Horizontal Termination

for PH20RDVS & PH25RDVS

Specially designed horizontal termination piece for the 5.3 and 6.6 series.

SC03HTA

$45.00

HeatFab Vertical Termination

for PH20RDVS & PH25RDVS
Termination piece for vertical terminations of the 5.3 and 6.6 series. Must be used with Rain Cap.

SC03VTA

$62.00

HeatFab Rain Cap

for PH20RDVS & PH25RDVS

Rain Cap. Specially designed for use with 5.3 and 6.6 series vertical termination.

SC03RCX

$66.00

HeatFab In-Line Drain

for PH20RDVS & PH25RDVS

3"/5" In-Line Drain Section

SC03DRN

$79.00

HeatFab Fire Stop

for PH20RDVS & PH25RDVS

12 x 12 Fire Stop

SC03FSA

$14.00

HeatFab Support Clamp

for PH20RDVS & PH25RDVS

5" Support Clamp

4527SS

$13.00

FasNSeal 4" Ventilation Accessories
for all Fan Assisted Gas Appliances

Vent pipes, elbows, rain cap, drip tee, flashing and other accessories for all fan assisted gas appliances.

PH28DV Vertical "Bazooka" Termination for use with 4" Protech Vent Pipe

PH28DV Vertical "Bazooka" Termination for use with 4" Protech Vent Pipe This termination is specifically designed to work with PH28 Direct Vent models. It is used when venting through a roof.

DVVTPT-28

$350.00

PH28DV Horizontal "Bazooka" Termination for use with 4" Protech Vent Pipe

This termination is specifically designed to work with PH28 Direct Vent models. It is used when venting through the side of a wall.

DVHTPT-28

$215.00

PH28DV Horizontal "Sweet" Termination Small
(8.25" or less)

All inclusive vent kit for through the wall terminations above the heater. Use this termination when the PH28DV is mounted on the same wall as vent penetration and the wall thickness is less than 8.25".

DVST-28SM

$299.00

PH28DV Horizontal "Sweet" Termination Medium (8.25"-11.75")

All inclusive vent kit for through the wall terminations above the heater. Use this termination when the PH28DV is mounted on the same wall as vent penetration and the wall thickness is 8.25"-11.75".

DVST-28MD

$299.00

PH28DV Horizontal "Sweet" Termination Large
(11.75" or more)

All inclusive vent kit for through the wall terminations above the heater. Use this termination when the PH28DV is mounted on the same wall as vent penetration and the wall thickness is more than 11.75".

DVST-28LG

$299.00