|
Takagi TK-Series Tanklesss Water Heaters
These are state-of-the art high-output units featuring pilotless
electronic ignition, computerized control, power ventilation, and freeze
protection for outdoor or indoor operation down to 10oF. They are very
efficient but all of them require AC power for operation. They will
consume AC power from the system 24 hours per day.
T-KD20 uses a "Direct Vent System". With a three-inch round
combustible air intake vent and four-inch round exhaust power vent, it
is designed to work when indoor combustion air is not available, making
it the perfect system for climate-controlled environments such as colder
areas.
T-H1 is the newest member of Takagi Tankless water heater
family. With 95% energy efficiency, the T-H1 is the most technologically
advanced water heater on the instantaneous water heater market today.
The new T-H1 is equipped with a Pre-Heating system and Built in
Neutralizer that provides greater efficiency and reliability. Designed
for heavy residential use with flows up to 10 GPM.
T-K Jr. is the most compact unit in the Takagi line. Designed
to produce endless hot water and radiant heating for smaller homes, The
T-K Jr. uses the same innovative technology as the original Takagi units
- only on an even smaller scale.
Note: The Takagi Tankless water heater must be vented in
accordance with the section on venting of equipment in the latest
edition of the National Fuel Gas PART NUMBER . This is a Category III appliance,
and must be vented accordingly. The following are UL listed or CSA
certified manufacturers: ProTech Systems FasNSeal, Z-Flex Inc. Z-Vent
II. Heat-Fab Inc. Saf-T Vent and Flex-L. They require 4" vent pipe.
Connect the vent pipe to the unit so that it is sealed airtight. Follow
the vent pipe manufacturers instructions when installing the vent pipe.
Do not common vent this appliance with any other vented appliance.
|
Model |
T-M1 |
T-H1 |
T-K2 |
T-KJR |
T-KD20 |
|
Power Input |
BTU x1000 |
235 |
190 |
185 |
140 |
185 |
|
Flue Size |
Inches |
4 |
4 |
4 |
4 |
4 |
|
Gas Pipe Size |
Inches |
3/4 |
3/4 |
3/4 |
3/4 |
3/4 |
|
Water Pipe Size |
Inches |
3/4 |
3/4 |
3/4 |
3/4 |
3/4 |
|
Min. Water Flow |
GPM |
0.75 |
0.75 |
0.75 |
0.75 |
0.75 |
|
Max. Water Flow |
GPM |
9.6 |
7.2 |
6.9 |
5.8 |
6.9 |
|
120 VAC Required |
Yes |
|
Height |
Inches |
24 |
28.5 |
24 |
20 |
24 |
|
Width |
Inches |
18 |
119 |
18 |
14 |
18 |
|
Depth |
Inches |
9 |
12 |
9 |
6 |
9 |
|
Weight |
Lbs. |
70 |
90 |
60 |
30 |
60 |
|
Flow Rates |
|
77°F Temp. Rise |
GPM |
5 |
4 |
4 |
3 |
4 |
|
LP Gas PART NUMBER |
083-01071 |
083-01073 |
083-01075 |
083-01077 |
083-01079 |
|
OUR PRICE |
$2,590 |
$3,750 |
$1480 |
$975 |
$1,495 |
|
Purchase |
 |
 |
 |
 |
 |
|
Nat. Gas PART NUMBER |
083-01072 |
083-01074 |
083-01076 |
083-01078 |
083-01080 |
|
OUR PRICE |
$2,590 |
$3,750 |
$1480 |
$975 |
$1,495 |
|
Purchase |
 |
 |
 |
 |
 |
|
Takagi Accessories |
|
Model |
Description |
Fits |
PART NUMBER |
OUR PRICE |
Purchase |
|
TK-BK01 |
Wall Mounting
Brackets |
all, not required for T-KJr, T-M1 |
083-01091 |
$25 |
 |
|
TK-TV01 |
Wall Ventilation
Terminator |
T-KJr, T-K2, T-K1S, T-M1 |
083-01092 |
$108 |
 |
|
TK-TV03 |
Exhaust Backflow
Prevention Kit |
All |
083-01093 |
$93 |
 |
|
TK-TV04 |
Outside Installation
Venting Cap |
T-KJr, T-K2, T-K1S |
083-01094 |
$60 |
 |
|
TK-TV05 |
Wall Ventilation
Terminator |
T-KD20 |
083-01095 |
$130 |
 |
|
TK-TV06 |
Outside Installation
Venting Cap |
T-M1 |
083-01096 |
$237 |
 |
|
TK-TV07 |
Direct Vent
Conversion |
T-H1 |
083-01097 |
$102 |
 |
|
TM-RE10 |
Temperature Remote
Controller |
T-M1 |
083-01099 |
$289 |
 |
|
TK-RE02 |
Temperature Remote
Controller |
T-KJr, T-K2, T-K1S, T-KD20 |
083-01101 |
$170 |
 |
|



|
|
|