FlexCharge Timer

The Flexcharge digital timer is a 7-day, 8-event digital clock based programmable load controller. Multiple load ON and OFF times can be programmed and each day can be programmed with it's own unique timing pattern. Eight ON an eight OFF events can be programmed independently.  For example: use one ON event to have a light come on at 7pm every day then use seven OFF events to turn the light off at a different time each day. The replaceable internal battery maintains the clock and programmed memory in the event of a system power failure (for up to 3 months).

Consumes less then 3mA in standby mode. Internal DPST(double-pole-single-throw) relay switch can turn one load on at the same time that it turns another load off. Timer switch can handle up to 8 amps of inductive load or up to 16 amps of resistive load, at 6 to 36 VDC or 120VAC.

Timer requires 12V DC or AC to operate. Reverse polarity protected. Manual override allows the user to turn the load ON or OFF as desired. Easy to use terminal block for wiring. Dry contacts.

1-year warranty.  Dimensions: 3.9"W x 3.8"H x 2"D

Description	SKU	Price	Purchase
Flexcharge Timer	054-07120	$80

RAB motion and heat sensing switch is 12 volt DC powered so it works full time even if your inverter is in standby or off. Turns lights on at approach, and holds for adjustable time, 5 seconds to 20 minutes after motion stops. Sensitivity distance is adjustable, up to about 50 feet out, farther in colder weather. Connect directly to any 12 volt light, or use a 12 volt relay to switch 120 volt lights. Set for night only operation, or use as security alarm, by setting for day/night operation. Switches 5 amp DC, uses only 7 milliamp idle, 40 milliamps when activating. 1-year warranty.

Description	SKU	Price	Purchase
12V Motion Sensor Switch	054-07237	$85

Night Watchman 12V Photoswitch

The Night Watchman Dusk To Dawn Controller is designed to be mounted outside in a marine salt air environment. It is completely waterproof, and very small (1" x 1" x 1") for mounting in an inconspicuous location.

Because power consumption is always a concern on battery powered systems (sail boats, PV systems, etc.) the Night Watchman is designed to use an extremely small amount of power in standby mode (only 0.00015A or 0.15mA), yet it is capable of supplying up to 10A of load current.

The Night Watchman will turn 12V incandescent or fluorescent lights ON in the evening within a half hour of sunset, and OFF in the morning within a half hour of sun rise.

The Night Watchman’s circuitry is designed to prevent flickering therefore it can be used to control 12V fluorescent lamps. 1-year warranty

WE ACCEPT...

All transactions made on this site are secure and Hacker Safe. 
Your Payments are processed for Taos Green Solar at SolarTaos.com
through PayPal, a trusted company owned and operated by eBay.com

Prices in this catalog subject to change without notice. 

This page was designed and maintained by Terry R. Wolff